Search This Blog

Thursday 18 October 2012

Critical factors for new product developments

Critical factors for new product developments

Abstract:

Small and medium enterprises (SMEs) are considered as an engine for economic growth all over the world and especially for developing countries. During the past decade new product development (NPD) has increasingly been recognized as a critical factor in ensuring the continued survival of SMEs. On the other hand, the rapid rate of market and technological changes has accelerated in the past decade so this turbulent environment requires new methods and techniques to bring successful new products to the marketplace. Virtual team can be a solution to answer the requested demand. Literatures have shown no significant differences between traditional NPD and virtual NPD in general. NPD in SME's virtual team has not been systematically investigated in developing countries. This paper aims to bridge this gap. This study first reviews the NPD and its relationship with virtuality and then identifies the critical factors of NPD in virtual teams. The statistical method was utilized to perform the required analysis of the data from the survey. The results are achieved through factor analysis at the perspective of NPD in some Malaysian and Iranian manufacturing firms (N=191). The 20 new product development factors were grouped into five higher level constructs. It gives valuable insight and guidelines, which hopefully will help managers of firms in developing countries to consider the main factors in NPD.

Keywords:

Survey finding, New product development, Factor analysis, Virtual teams

Introduction

New product development (NPD) is widely recognized as a key to corporate property (Lam et al., 2007). The product life cycle decreases every year and the customer demand dramatically increased. With the needs to respond quickly to dynamic customer needs, increased complexity of product design and rapidly changing technologies, the selection of the right set of NPD is critical to a company's long-term success (Chen et al., 2008). Obviously, the situation will be even more severe for small and medium sized enterprises (SMEs) than for large organizations, because of SMEs' limited financial and technical capability (Mi et al., 2006). Virtuality has been presented as one solution for SMEs aiming to increase their competitiveness (Pihkala et al., 1999). Forming a virtual team will provide an opportunity to reduce time to market of new product and respond quickly to the market demands. May and Carter (2001) in their case study of a virtual team working in the European automotive industry have shown that enhanced communication and collaboration between geographically distributed engineers at automotive manufacturer and supplier sites make them get benefits are better quality, reduced costs and a reduction in the time-to-market (between 20% to 50%) for a new product vehicle.
The ultimate objective of all NPD teams is superior marketplace success of the new product (Akgun et al., 2006). The specialized skills and talents required for the development of new products often reside (and develop) locally in pockets of excellence around the company or even around the world. Therefore, firms, have no choice but to disperse their new product units to access such dispersed knowledge and skills (Kratzer et al., 2005). Successful NPD requires firms to develop routines and practices to collaborate with suppliers, customers, and internal cross-functional employee teams (Mishra and Shah, 2009). As a result, firms are finding that internal development of all technology needed for new products and processes are difficult or impossible. They must increasingly acquire technology from external sources (Stock and Tatikonda, 2004). Virtualization in NPD has recently started to make serious headway due to developments in technology-virtuality in NPD now is technically possible (Leenders et al., 2003). Virtual NPD in SMEs is in its infancy in developing countries, and limited research has been done on introduction of NPD in the SMEs through virtual team. So we constituted the topic which is somewhat lacking in the literature as a research gap.
The main objective of this paper is to present a model of the critical factors of NPD in small and medium enterprises of developing countries. The remainder of the paper is organized as follows: section 2 presents the main concepts of new product development; section 3 reviews recently study on the relationship between NPD and virtuality, section 4 explore the importance of SMEs, section 5 presents the relationship between SMEs and virtual team, section 6 describe research methodology, section 7 to 9 are presents data collection, data analysis and discussion and lastly section 10 concludes the paper with some perspectives.

What is New Product Development (NPD)?

The literature provided a number of definitions for what constitute a new product development (NPD). Product development definition used by different researchers in slightly different ways (Ale Ebrahim et al., 2009b). Generally, it is the process that covers product design, production system design and product introduction processes and start of production (Johansen, 2005). Loch and Kavadias (2008) in "Handbook of New Product Development Management" define NPD " consists of the activities of the firm that lead to a stream of new or changed product market offerings over time. This includes the generation of opportunities, their selection and transformation into artifacts (manufactured products) and activities (services) offered to customers and the institutionalization of improvements in the NPD activities themselves". According to the product development and management association (PDMA) glossary for new product development in the PDMA tool book 3 for new product development (Griffin and Somermeyer, 2007), NPD defined as: "The overall process of strategy, organization, concept generation, product and marketing plan creation and evaluation, and commercialization of a new product. Also, frequently referred to just as product development". Krishnan and Ulrich (2001) defined "product development as the transformation of a market opportunity and a set of assumptions about product technology into a product available for sale". NPD has been described in general form and there is not any specified definition for new product development of SMEs virtual team in developing countries, which mean what is NPD in SMEs virtual team supposed to be in developing countries? This paper aims to extract the main factors of NPD in selective cases.

NPD and Virtuality

Given the complexities involved in organizing face-to-face interactions among team members and the advancements in electronic communication technologies, firms are turning toward employing virtual NPD teams (Badrinarayanan and Arnett, 2008). Information technology (IT) improves NPD flexibility (Durmusoglu and Calantone, 2006). Ozer (2004) discussed that the internet facilitates and improves collaborations and thus increases the performance of new products. Given the resulting differences in time zones and physical distances in such efforts, virtual NPD projects are receiving increasing attention (McDonough et al., 2001). The use of virtual teams to develop new products is growing rapidly and can be dependent organizations to maintain a competitive advantage. On the other hand, competitive strategies are forcing companies to deploy their NPD resources globally, thus making collocated NPD teams prohibitively expensive and logistically difficult to manage (Susman et al., 2003). Susman et al. (2003) noted research will increasingly focus on geographically dispersed NPD teams as their number will grow faster than collocated NPD teams. McDonough et al. (2001) argued that NPD teams are growing the fastest. Virtuality affects the creative performance of NPD teams (Leenders et al., 2003). For example, Cisco, has created the Cisco Collaboration Centre of Excellence to achieve its vision. Despite this industry attention, there is much not yet understood about how to effectively collaborate virtually to facilitate NPD (Susman and Majchrzak, 2003).
Some studies (Martinez-Sanchez et al., 2006) emphasized the challenges and difficulties experienced by virtual and conventional for new product development teams were not significantly different, although they were greater than the challenges and difficulties experienced by in-house teams. NPD in SME's virtual team has not been systematically investigated in literature. Only literatures have shown no significant differences between traditional NPD and virtual NPD in general. This paper aims to bridge this gap.

Small and Medium Enterprises (SMEs)

SMEs are a major part of the industrial economies (Eikebrokk and Olsen, 2007). Their survival and growth have therefore, been a prominent issue. The contributions of SMEs to employment and the countries' gross domestic product (GDP) are significant (Kotelnikov, 2007). Acs et al. (Acs et al., 1997) argued that small firms are indeed the engines of global economic growth. Small and Medium Enterprises (SMEs) play an important role to promote economic development. Many economists believe that the wealth of nations and the growth of their economies strongly depend upon their SMEs' performance (Schr�der, 2006). In many developed and developing countries, small and medium-sized enterprises (SMEs) are the unsung heroes that bring stability to the national economy. They help buffer the shocks that come with the boom and bust of economic cycles. SMEs also serve as the key engine behind equalizing income disparity among workers (Choi, 2003).
SMEs seem to be appropriate units to behave like network nodes because of their lean structure, adaptability to market evolution, active involvement of versatile human resources, ability to establish a sub-contracting relation and good technological level of their products (Mezgar et al., 2000). In light of the above, SMEs have advantages in terms of flexibility, reaction time, and innovation capacity that make them central actors in the new economy (Raymond and Croteau, 2006).

SMEs Definition

There are many accepted definitions of SMEs and the classifications vary from industry to industry and from country to the country (O'Regan and Ghobadian, 2004). Table 1 illustrate a summary of SMEs definition in manufacturing sector of selected countries. In the most of countries which is listed in Table 1 this definition is applicable to all enterprise sectors. Different countries adopt different criteria such as employment, sales or investment for defining small and medium enterprises (Ayyagari et al., 2007). At present, there seems to be no consensus on the definition for SMEs (Deros et al., 2006). In the absence of a definitive classification, an agreement has developed around the European Commission (EC) criteria for SME classification (O'Regan and Ghobadian, 2004) . This definition adopts a quantitative approach emphasizing "tangible" criteria, employee numbers up to 250 employees, turnover and balance sheet statistics (Tiwari and Buse, 2007). While turnover and balance sheet statistics are part of the criteria, the overriding consideration in practice appears to be an employee number based. Even if all three criteria were afforded equal consideration, it could be argued that the definition fails to take into account the attributes of a modern day small to the medium-sized firm. The case studies employed here are SMEs in the Malaysian and Iranian manufacturing sector are chosen according to the EC definition of SMEs (Figure 1).

SMEs and Virtual Team

Past literature often hypothesized that SME did not innovate in formally recognized ways, and that they made much more extensive use of external linkages (Laforet and Tann, 2006, Hoffman et al., 1998). The SME is not a scaled-down version of a large company. It has different characteristics that distinguish them from large corporations and that can of course change across different countries and cultures; they are generally independent, multi-tasking, cash-limited and based on personal relationships and informality , as well as actively managed by the owners, highly personalized, largely local in their area of operation and largely dependent on internal sources to finance growth (Perrini et al., 2007). To survive in the global economy SMEs have to improve their products and processes exploiting their intellectual capital in a dynamic network of knowledge-intensive relations inside and outside their borders (Corso et al., 2003). So if small firms want to make a step change in their technological and innovation base, they may have to rethink their approach to cooperation (Hanna and Walsh, 2002). SMEs need to focus on core competences for efficiency matters; they need to cooperate with external partners to compensate for other competences and resources. This is especially the case in the field of new product development , where SMEs face specific problems in comparison to large firms (Pullen et al., 2008).
Despite the widespread publicity of information technology, the application of Internet technology to upgrade and enhance the product design and business operation by most enterprises, especially for the small and medium sized enterprises, is still at its infancy (Zhan et al., 2003). The SMEs are one of the sectors that have a strong potential to benefit from advances in Information and Communication Technologies (ICTs) and the adaptation of new business modes of operation (Miles et al., 2000). The use of ICTs can be considered as key factors for innovation and entrepreneurship. ICTs are a must for SMEs to innovate (Redoli et al., 2008). It is especially urgent for SMEs to construct a service platform of networked to speed up the product development process (Lan et al., 2004). Collaboration is particularly critical when SME's are involved with the aim of developing new products (Romero et al., 2008).
The success of developed countries can be attributed to factors relating to the emergence of new business technologies and cultures, such as, virtual technology. This constituted the soft-technology complex that provided the environment for innovation and the effective application of technologies (Zhouying, 2005). Developing countries are, on the other hand, characterized by the absence of soft technology and limited abilities to make effective and efficient use of the technologies they obtain through a variety of transfer mechanisms, and to innovate and compete in the global market. Many SMEs have difficulties achieving successful innovation, despite having significant investment in research and development (O'Regan et al., 2006). Gassmann and Keupp (2007) found that managers of SMEs should invest less in tangible assets, but more in those areas that will directly generate their future competitive advantage (e.g., in R&D to generate knowledge, and in their employees' creativity to stimulate incremental innovations in already existing technologies). Moreover, the Web-because of its easy access to large numbers of potential customers at reasonable cost may especially aid smaller companies that have not enjoyed the same national reach or financial resources as larger companies for market research (Buyukozkan et al., 2007). Levy et al. (2003) state that SMEs are knowledge creators but are poor in knowledge retention. They need to be proactive in knowledge sharing arrangements to recognize that knowledge has value and the value added is derived from knowledge exchange (Egbu et al., 2005).

Research Methodology

This research has been applied a statistical approach based on factor analysis and research framework Figure 2. Factor analysis is a technique attempts to identify underlying variables, or factors, that explain the pattern of correlations within a set of observed variables. Factor analysis is often used in data reduction to identify a small number of factors that explain most of the variance that is observed in a much larger number of manifest variables. Factor analysis is also suitable for analyzing the patterns of complex, multidimensional relationships encountered by researchers (Fathian et al., 2008).
Base on main factors in NPD, 20 questions derived from literature review and an online questionnaire was designed. To help disentangle the concepts of new product development in the virtual team of SMEs, 20 individual criteria asked from respondents (Table 2). These criterions have been grouped together through factor analysis to form the critical factors of NPD in virtual teams. The respondent asked a series of questions such as NPD1: "Based on your organizations, a new product/process development is: The use of things already known (reverse Engineering)? ".

Data Collection

The research target was manufacturing SMEs in Malaysia (M) and Iran (I) that are using the virtual team in their organization. In order to understand the viewpoints of SMEs on NPD an on line questionnaire has been sent to relevant SMEs in both countries. The rapid expansion of Internet users has given web-based surveys the potential to become a powerful tool in survey research (Sills and Song, 2002). Denscombe (2006) findings encourage social researchers to use web-based questionnaires with confidence and the data produced by web-based questionnaires is equivalent to that produced by paper-based questionnaires. Other authors emphasized that the data provided by internet methods are of at least as good quality as those provided by traditional paper-and-pencil methods (Deutskens et al., 2006). However minor differences occur between the two survey methods; online respondents provide more improvement suggestions (Deutskens et al., 2006) and tended to be slightly longer than those from the paper version, the differences are not statistically significant (Denscombe, 2008).
The main sampling target was managing director, R&D manager, the new product development manager, project and design manager and appropriate people who were most familiar with the NPD in the firm. For better understanding the questionnaire has been prepared into different languages English and Persian. The Iranian respondents could select either English version or Persian version of the questionnaire. 3625 emails have sent to relevant SMEs and 686 of them clicked the online web page and answered the questionnaire. Out of 686 respondents 190 SMEs responded completely and the rest answered partially. Table 3 summarized online survey data collection. Only 121 firms were met the criteria of SMEs definition in this research so the rest of responded deducted from factor analysis. A cross-tabulation descriptive statistics employed to find the frequency and relationship between the country and virtuality as illustrate in Table 4.

Data Analysis

In the case of reliability analysis, Cronbach's Alpha (Cronbach, 1951) was employed to measure internal consistency of the 20 factors. A reliability test was carried out to ensure that the research finding have the ability to provide consistence results. Cronbach's alpha for the 20 NPD factors was found within acceptable limits and to be 0.926, which means there was a high reliability for designed questions. In order to conclude whether the partial correlation of variables was small, the authors used the Kaiser-Meyer-Olkin (KMO) measure of sampling adequacy and Bartlett's Chi-square test of Sphericity (Fathian et al., 2008). Table 5 summarized the results of KMO which is 0.863 and significant value for Bartlett's test in less than 0.05, which means there is a good correlation.
An exploratory factor analysis was conducted on 20 NPD factors. Using a Principle Component Analysis with a Varimax Rotation and an Eigenvalue of 1 as the cut-off point (Akg�n et al., 2008) and an absolute value of a factor loading greater than 0.5 (Fathian et al., 2008). The items and their factor loadings after Exploratory Factor Analysis, Eigenvalue, and percentage of variance explained, appear in Table 6 and Table 7. The 20 factors were grouped into five higher level constructs, which had an Eigenvalue greater than one.

Discussion

The authors attempted to identify and named the confirmed factors based on the principle of being concise without losing clarity of meaning. After extracting the higher level constructs, Variables with higher loadings are considered more important and have greater influence on the name of selected reduced factors. The names and contents of five derived factors are:
  • Factor 1: It consists of NPD17 to NPD20, which are "Gaining new markets or market share", "Reducing labor costs", "Reducing materials consumption" and "Reducing energy consumption" respectively. This factor is named "Process Features"
  • Factor 2: It consists of NPD4,NPD5, NPD12 and NPD13, which are "Increase efficiency of product", "Meet the role and regulation", "Reduction in quality problems" and "Surprise or delight customers" respectively. Since NPD12 has been higher loading (0.794) this factor named "Customer demand".
  • Factor 3: It consists of NPD2, NPD3, NPD7 and NPD15, which are "The use of things already known (Reverse Engineering)", "Making use of existing technologies (Adaptation)", "Improvements in elements of product technologies" and "Extending product range" respectively. This factor is named "Technology Features".
  • Factor 4: It consists of NPD6, NPD8, NPD10 and NPD11, which are "Improvement in product functionality/quality", "Major innovation in product technologies", "Creation of new product concepts" and "Improvement in the product process" respectively. This factor is named "Innovative process".
  • And lastly factor 5: It consists of NPD1, NPD9, NPD14 and NPD16, which are "Whole R&D activities", "Major innovation in products as a whole", "Replacing products are being phased out" and "Reducing production lead times" respectively. Since NPD14 has been higher loading (0.649) this factor named "Introduce New Product".
All above mentioned factors are summarized in Figure 3. This new conceptual model is based on data analysis of survey findings. The conceptual model provides an overview of NPD understanding in SMEs (the ones which are familiar with virtuality) of selected developing countries. Although more than half respondents are working on virtual team bases for new product developments but virtual team application in SMEs is still in infancy. Slightly more than 80% of SMEs have not received an email invitation for participating in an online survey (Table 3).
SMEs, especially in developing countries, sever from lack of resources and manpower (Ale Ebrahim et al., 2009a). The ability to consistently select the best factors to investigate is therefore, vitally important to firms in said countries. Hence the manager of NPD team in SMEs has to optimize the new product process. This new conceptual model operates as a tool to help a manager of NPD team to concentrate the main and important issues in NPD process, which lead to increase the efficiency of new product procedure. For academic researchers, this study contributes to a theoretical understanding of the factors that promote the diffusion of NPD in SMEs.

Conclusion

Factor Analysis provides direct insight into the interrelationships between 20 variables and reduced to five components. First factor which is "Process Features" and it is a combination of "Gaining new markets or market share", "Reducing labour costs", "Reducing materials consumption" and "Reducing energy consumption", is more important than the rest four factors. So managers of firms in developing countries should consider the main factors in NPD. Customers demand (people) and technology features are respectively important after process issues. Therefore, along with Ale Ebrahim et al. (2009c) recent research, people and process are more important in the virtual team than about technology.
Table 3 shows slightly above 18% of SMEs have been received the online survey email invitation. So it can conclude that most SMEs in selected developing countries are still developing a new product in the traditionally way, and they are not adopted with new information and communication technologies. As virtual NPD in SMEs is in its infancy in developing countries, it seems to be a necessary start the introduction of the virtual team in the SMEs. The first step is perceived NPD in this new environment, which is explored in this study.
This study is probably the first to present a conceptual model for NPD issue in SMEs in selected developing countries. The future research needs to investigate the model and verify it by a larger sample of SMEs from different sectors since this study was limited to manufacturing sector. In a larger sample, it is possible to compare the results between Iran and Malaysian SMEs.

Acknowledgements

The research reported here was supported by a grant from University of Malaya (grant No. PS404/2009C), the authors gratefully acknowledge this support. Further, the authors are grateful to the editors and two anonymous reviewers for their helpful and insightful comments on first version of this paper.

References:

  • ACS, Z. J., MORCK, R., SHAVER, J. M. & YEUNG, B. 1997. The Internationalization of Small and Medium-Sized Enterprises: A Policy Perspective. Small Business Economics, 9, 7-20.
  • AKGUN, A. E., DAYAN, M. & BENEDETTO, A. D. 2008. New product development team intelligence: Antecedents and consequences Information & Management 45, 221-226.
  • AKGUN, A. E., LYNN, G. S. & YILMAZ, C. 2006. Learning process in new product development teams and effects on product success: A socio-cognitive perspective. Industrial Marketing Management, 35, 210 - 224.
  • ALE EBRAHIM, N., AHMED, S. & TAHA, Z. 2009a. Virtual R & D teams in small and medium enterprises: A literature review. Scientific Research and Essay, 4, 1575-1590.
  • ALE EBRAHIM, N., AHMED, S. & TAHA, Z. 2009b. Virtual Teams for New Product Development - An Innovative Experience for R&D Engineers. European Journal of Educational Studies, 1, 109-123.
  • ALE EBRAHIM, N., AHMED, S. & TAHA, Z. 2009c. Virtual Teams: a Literature Review. Australian Journal of Basic and Applied Sciences, 3, 2653-2669.
  • AYYAGARI, M., BECK, T. & DEMIRGUC-KUNT, A. 2007. Small and Medium Enterprises Across the Globe. Small Business Economics, 29, 415-434.
  • BADRINARAYANAN, V. & ARNETT, D. B. 2008. Effective virtual new product development teams: an integrated framework. Journal of Business & Industrial Marketing, 23, 242-248.
  • BUYUKOZKAN, G., BAYKASOGLU, A. & DERELI, T. 2007. Integration of Internet and web-based tools in new product development process. Production Planning & Control, 18, 44-53.
  • CHEN, H. H., KANG, Y. K., XING, X., LEE, A. H. I. & TONG, Y. 2008. Developing new products with knowledge management methods and process development management in a network. Computers in Industry, 59, 242-253.
  • CHOI, T. Y. 2003. Korea's Small and Medium-Sized Enterprises: Unsung Heroes or Economic Laggards? Academy of Management Executive, 17.
  • CORSO, M., MARTINI, A., PAOLUCCI, E. & PELLEGRINI, L. 2003. Knowledge management configurations in Italian small-to-medium enterprises. Integrated Manufacturing Systems, 14, 46-56.
  • CRONBACH, L. 1951. Coefficient alpha and the internal structure of tests. Psychometrika, 16, 297-334.
  • DENSCOMBE, M. 2006. Web-Based Questionnaires and the Mode Effect: An Evaluation Based on Completion Rates and Data Contents of Near-Identical Questionnaires Delivered in Different Modes. Social Science Computer Review, 24, 246-254.
  • DENSCOMBE, M. 2008. The Length of Responses to Open-Ended Questions: A Comparison of Online and Paper Questionnaires in Terms of a Mode Effect. Social Science Computer Review, 26, 359-368.
  • DEROS, B. M., YUSOF, S. M. & SALLEH, A. M. 2006. A benchmarking implementation framework for automotive manufacturing SMEs. Benchmarking: An International Journal, 13.
  • DEUTSKENS, E., DE RUYTER, K. & WETZELS, M. 2006. An assessment of equivalence between online and mail surveys in service research. Journal of Service Research, 8, 346-355.
  • DURMUSOGLU, S. S. & CALANTONE, R. J. 2006. Is more information technology better for new product development? Product & Brand Management, 15, 435-441.
  • EGBU, C. O., HARI, S. & RENUKAPPA, S. H. 2005. Knowledge management for sustainable competitiveness in small and medium surveying practices. Structural Survey, 23, 7-21.
  • EIKEBROKK, T. R. & OLSEN, D. H. 2007. An empirical investigation of competency factors affecting e-business success in European SMEs. Information & Management, 44, 364-383
  • FATHIAN, M., AKHAVAN, P. & HOORALI, M. 2008. E-readiness assessment of non-profit ICT SMEs in a developing country: The case of Iran. Technovation, 28, 578-590.
  • GASSMANN, O. & KEUPP, M. M. 2007. The competitive advantage of early and rapidly internationalising SMEs in the biotechnology industry: A knowledge-based view. Journal of World Business, 42, 350-366.
  • GRIFFIN, A. & SOMERMEYER, S. 2007. The PDMA ToolBook 3 for New Product Development, John Wiley & Sons, Inc.
  • HANNA, V. & WALSH, K. 2002. Small Firm Networks: A Successful Approach to Innovation? . R&D Management, 32, 201-207.
  • HOFFMAN, K., PAREJO, M., BESSANT, J. & PERREN, L. 1998. Small firms, R&D, technology and innovation in the UK: a literature review. Technovation 18, 39-55
  • JOHANSEN, K. 2005. Collaborative Product Introduction within Extended Enterprises. PhD, Link�pings Universitet.
  • KOTELNIKOV, V. 2007. Small and Medium Enterprises and ICT. In: HAK-SU, K. (ed.) Asia-Pacific Development Information Programme (UNDP-APDIP) e-Primers for the Information Economy, Society and Polity. Bangkok: UNDP Regional Centre.
  • KRATZER, J., LEENDERS, R. & ENGELEN, J. V. 2005. Keeping Virtual R&D Teams Creative. Industrial Research Institute, Inc., March-April, 13-16.
  • KRISHNAN, V. & ULRICH, K. T. 2001. Product Development Decisions: A Review of the Literature. Management Science, 47, 1.
  • LAFORET, S. & TANN, J. 2006. Innovative characteristics of small manufacturing firms. Journal of Small Business and Enterprise Development, 13, 363 - 380.
  • LAM, P.-K., CHIN, K.-S., YANG, J.-B. & LIANG, W. 2007. Self-assessment of conflict management in client-supplier collaborative new product development. Industrial Management & Data Systems, 107, 688 - 714.
  • LAN, H., DING, Y., HONG, J., HUANG, H. & LU, B. 2004. A web-based manufacturing service system for rapid product development. Computers in Industry, 54, 51 - 67
  • LEENDERS, R. T. A. J., ENGELEN, J. M. L. V. & KRATZER, J. 2003. Virtuality, communication, and new product team creativity: a social network perspective. Journal of Engineering and Technology Management, 20, 69-92.
  • LEVY, M., LOEBBECKE, C. & POWELL, P. 2003. SMEs, co-opetition and knowledge sharing: the role of information systems. European Journal of Information Systems, 12, 3-17
  • LOCH, C. & KAVADIAS, S. 2008. Handbook of New Product Development Management, Butterworth-Heinemann is an imprint of Elsevier.
  • MARTINEZ-SANCHEZ, A., PEREZ-PEREZ, M., DE-LUIS-CARNICER, P. & VELA-JIMENEZ, M. J. 2006. Teleworking and new product development. European Journal of Innovation Management, 9, 202-214.
  • MAY, A. & CARTER, C. 2001. A case study of virtual team working in the European automotive industry. International Journal of Industrial Ergonomics, 27, 171-186.
  • MCDONOUGH, E. F., KAHN, K. B. & BARCZAK, G. 2001. An investigation of the use of global, virtual, and collocated new product development teams. The Journal of Product Innovation Management, 18, 110-120.
  • MEZGAR, I., KOVACS, G. L. & PAGANELLI, P. 2000. Co-operative production planning for small- and medium-sized enterprises. International Journal of Production Economics, 64, 37-48.
  • MI, X., SHEN, W. & ZHAO, W. 2006. Research on Internet-Based System Architecture for Collaborative Product Development. Computer Supported Cooperative Work in Design II. Springer Berlin / Heidelberg.
  • MILES, R. E., SNOW, C. C. & MILES, G. 2000. TheFuture.org Long Range Planning, 33, 300-321.
  • MISHRA, A. A. & SHAH, R. 2009. In union lies strength: Collaborative competence in new product development and its performance effects. Journal of Operations Management, 27, 324-338.
  • O'REGAN, N. & GHOBADIAN, A. 2004. Testing the homogeneity of SMEs - The impact of size on managerial and organisational processes. European Business Review, 16.
  • O'REGAN, N., GHOBADIAN, A. & SIMS, M. 2006. Fast tracking innovation in manufacturing SMEs Technovation, 26, 251-261
  • OZER, M. 2004. The role of the Internet in new product performance: A conceptual investigation. Industrial Marketing Management 33, 355- 369.
  • PERRINI, F., RUSSO, A. & TENCATI, A. 2007. CSR Strategies of SMEs and Large Firms. Evidence from Italy. Journal of Business Ethics, 74, 285-300.
  • PIHKALA, T., VARAMAKI, E. & VESALAINEN, J. 1999. Virtual organization and the SMEs: a review and model development. Entrepreneurship & Regional Development, 11, 335 - 349.
  • PULLEN, A., WEERD-NEDERHOF, P. D., GROEN, A. & FISSCHER, O. 2008. Configurations of external SME characteristics to explain differences in innovation performance. High Technology Small Firms Conference Twente University,Netherlands.
  • RAYMOND, L. & CROTEAU, A. M. 2006. Enabling the strategic development of SMEs through advanced manufacturing systems A configurational perspective. Industrial Management & Data Systems, 106, 1012-1032.
  • REDOLI, J., MOMP�, R., GARC�A-D�EZ, J. & L�PEZ-CORONADO, M. 2008. A model for the assessment and development of Internet-based information and communication services in small and medium enterprises Technovation, 28, 424-435.
  • ROMERO, F., COMPANY, P., AGOST, M. J. & VILA, C. 2008. Activity modelling in a collaborative ceramic tile design chain: an enhanced IDEF0 approach. Research Engineering Design, 19, 1-20.
  • SCHR�DER, H. H. 2006. Past, Present and Future of Knowledge Integration. In: JETTER, A., SCHR�DER, H. H., KRAAIJENBRINK, J. & WIJNHOVEN, F. (eds.) Knowledge Integration-The Practice of Knowledge Management in Small and Medium Enterprises. Physica-Verlag HD.
  • SILLS, S. J. & SONG, C. 2002. Innovations in Survey Research: An Application of Web-Based Surveys. Social Science Computer Review, 20, 22-30.
  • STOCK, G. N. & TATIKONDA, M. V. 2004. External technology integration in product and process development. International Journal of Operations & Production Management, 24, 642-665.
  • SUSMAN, G. I., GRAY, B. L., PERRY, J. & BLAIR, C. E. 2003. Recognition and reconciliation of differences in interpretation of misalignments when collaborative technologies are introduced into new product development teams. Journal of Engineering and Technology Management, 20, 141-159.
  • SUSMAN, G. I. & MAJCHRZAK, A. 2003. Research issues in knowledge management and virtual collaboration in new product development: an introductory essay. Journal of Engineering and Technology Management, 20, 1-5.
  • TIWARI, R. & BUSE, S. 2007. Barriers to Innovation in SMEs: Can the Internationalization of R&D Mitigate Their Effects? Proceedings of the First European Conference on Knowledge for Growth: Role and Dynamics of Corporate R&D (CONCORD 2007). Seville, Spain.
  • ZHAN, H. F., LEE, W. B., CHEUNG, C. F., KWOK, S. K. & GU, X. J. 2003. A web-based collaborative product design platform for dispersed network manufacturing. Journal of Materials Processing Technology, 138, 600-604.
  • ZHOUYING, J. 2005. Globalization, technological competitiveness and the 'catch-up' challenge for developing countries: some lessons of experience. International Journal of Technology Management and Sustainable Development 4, 35-46

Critical factors for new product developments

No comments:

Post a Comment